Every job starts with the right tool.

McJING Tools

25PC (1-13mm) Cobalt HSS Drill Bit Set

25 Piece Set - Includes Sizes 1 - 13mm in 0.5mm Increments (Supplied In Metal Case). M35 alloyed HSS steel with 5% Cobalt content - Fully ground from solid material. Coated with cobalt for enhanced strength and featuring precision roll-forged flutes, these bits ensure precise and clean drilling in wood, metal, and plastic materials. Suitable for aluminium and stainless steel with cutting lubricant. Sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 7.5mm, 8.0mm, 8.5mm, 9.0mm, 9.5mm, 10.0mm, 10.5mm, 11.0mm, 11.5mm, 12.0mm, 12.5mm, 13mm.

Page reports in stock

Observed 6 Sept 2026

SIEG

26mm Diamond Knurling Whee 2pcs Set

Quality Diamong Knurling Wheel for clean, consistent diamond patterns on cylindrical workpieces. Specifications: Pitch: 0.5mm (fine), 0.8mm (medium), 1.0mm (coarse) Diameter: 26mm Width: 8mm Bore: 8mm

Option observed: 26mm Diamond Knurling Whee 2pcs Set - 1.0mm (coarse)

Page reports in stock

Observed 6 Sept 2026

McJING Tools

27mm Wooden Vice Handle

Crafted from wood with protective end caps, this 27mm handle fits standard 1-1/4" diameter vice screws. Measuring 27 x 480mm, it provides a comfortable grip for controlled clamping operations on your workbench.

Page reports in stock

Observed 6 Sept 2026

McJING Tools

29 Hole Drill Bit Stand (Imperial)

29 hole imperial drill bit stand hole sizing from: 1/16" to 1/2" Size: 165mm x 60mm

Page reports in stock

Observed 6 Sept 2026

McJING Tools

29 Piece Drill Bit Stand

29 Piece imperial drill bit stand Size: 165mm x 60mm

Page reports in stock

Observed 6 Sept 2026

McJING Tools

2pc 90 Degree Angle Vice Set

Perfect for securing boards up to 22mm thick, this corner clamp duo simplifies assembly work on boxes, cabinets, and drawers. Ideal for framing, drilling, doweling, and countless workshop tasks that demand precise positioning and reliable holding power. Comes in a set of 2 corner clamps. These are ultra heavy duty and can handle anything you throw at them.

Page reports in stock

Observed 6 Sept 2026

McJING Tools

2pc Bandsaw Wheel Rubber Tyre

These rubber rings have good wear resistance and toughness, ensuring that it is not easy to break and loosen after installation. To install, remove the original damaged rubber ring. If there is rubber ring residue on the outer edge of the wheel, please clean up the residue first. Soak the new anti-skid rubber ring in warm water for 3-5 minutes, and install it after the rubber ring is softened. When installing, start from one side of the wheel, press one end of the rubber ring firmly into the groove on the outer edge of the wheel, and then use a flat-blade screwdriver to slowly pry the rubber ring into the groove on the outer edge of the wheel. Do not use too much force. If necessary, you can place a few drops of glue along the grooves on the edge of the wheel to ensure a more secure installation. 8 Inch: Use for Band Saw Wheel diameter 200mm or 210mm, general bandsaw blade length is 1400~1425mm. 9 Inch: Use for Band Saw Wheel diameter 230mm, general bandsaw blade length is 1512~1575mm. 10 Inch: Use for Band Saw Wheel diameter 250mm, general band saw blade length is ~1826mm. 12 Inch: Use for Band Saw Wheel diameter 315mm, general band saw blade length is ~2240mm. 14 Inch: Use for Band Saw Wheel diameter 350mm, general band saw blade length is ~2560mm.

Option observed: D165 x W12 x L520mm Tyre Pair

Page reports in stock

Observed 6 Sept 2026

McJING Tools

2pc Drawer Installation Clamps

Simplify your drawer installation process with these clamps for fastening drawers without other clamping tools. The drawer fixing clip has an auxiliary clamping structure which is strong and sturdy allowing flat uniform force. Also features a comfortable round torx knob. The simple design allows you to adjust the drilling depth. It is also easy to disassemble, save time and improve work efficiency.

Option observed: 2pc/set 70 x 53 x 70mm 2mm Stainless Steel

Page reports in stock

Observed 6 Sept 2026

McJING Tools

2pc Fly Cutter Set (10mm Shank)

Precision fly cutting made simple with this two-piece set featuring 10mm shanks. Includes holders for 6mm and 8mm tool steel cutters with heads in 15mm and 20mm diameters. Perfect for clean, accurate boring and facing operations. Head Diameter Shank Size Tool Bit Size 15mm 10mm 6mm 20mm 10mm 8mm

Page reports in stock

Observed 6 Sept 2026

McJING Tools

2pc Linear Rail / Shaft Collet Stop (Alloy)

This 2-piece aluminum alloy shaft collar set features precision engineering for linear rail applications. With inner diameters of 16mm and 20mm and outer diameters of 35mm and 40mm, these collars secure shafts without causing damage. Chrome-plated surfaces resist oxidation and corrosion while maintaining hardness and longevity. Ideal for CNC machines, DIY projects, and linear motion systems requiring reliable shaft positioning and axial stops.

Option observed: 16mm Linear Rail Stop Collars (Pack 2)

Page reports in stock

Observed 6 Sept 2026

McJING Tools

2pc Multi-Step Depth Gauge

Precisely calibrate your table saw and router table with this dual-piece depth gauge set. Quickly adjust blade and bit heights to achieve exact, consistent cuts every time. Essential for woodworkers who demand accuracy and efficiency in their setup process. Size: 130 x 130 x 8mm Range: 5-36mm / 5.5-36.5mm Material: Bakelite

Page reports in stock

Observed 6 Sept 2026

McJING Tools

2pc Sawhorse brackets

This bracket kit is ideal for building your own sawhorses. Made from high quality, wear-resistant, antirust metal the sawhorses have high hardness and strength. 100mm x 90mm x 143mm The bite can also be adjusted for different thickness of wood. Max clamping distance: 40-45mmLeg stock size: 40x90mm 180kg capacity

Page reports in stock

Observed 6 Sept 2026

Tool King

2pc Tapered Reamer Set 13383

WORKFORCE 2pc Tapered reamer set 13383 A must have tool for any workshop, these reamers are ideal for de burring, enlarging and shaping holes in steel, sheet metal and wood. Tapers from 3mm to 12mm Made from Hardened carbon steel Features Hardened steel 2pc set tapered design T Handle design Works on: Steel, plastic, wood, alloy, copper, brass

Page reports out of stock

Observed 6 Sept 2026

McJING Tools

2pc/set Adjustable Drill Stop Set (Alloy Body)

This two piece stop collar set fits all drill bits from 1.5mm to 12.7mm. The smaller one takes bits from 1.5 - 6.4mm, and the larger takes 6.4 - 12.7mm bits. Designed with double-ended collets inside threaded sleeves, they lock in position with a quick twist. Made from aluminium alloy for durability. (Drill Bit Not Included)

Page reports in stock

Observed 6 Sept 2026

McJING Tools

2pc/set Corner Radius Jig Router Templates (R10~R50)

This 2-piece corner radius template set features durable anodized aluminum alloy construction designed for precision routing. Includes templates for R10, R15, R20, R25, R30, R35, R40, and R50 radii, giving you versatile options for various edge profiles. The compact 4-in-1 design simplifies storage and transport while eliminating the need for multiple fixtures. Perfect for creating smooth, accurate rounded corners on furniture, frames, and wooden projects. Delivers consistent, professional results whether routing inner edges or cutting outer radii.

Page reports in stock

Observed 6 Sept 2026

McJING Tools

2pc/set T-Track Clamp (ABS)

Keep your workpiece firmly in place with this 2-piece T-track clamp set. The ergonomic plastic handle twists smoothly for quick, tool-free clamping and release on any T-track jig. Built tough with PVC construction and M8 x 90mm sliding bolts, these clamps deliver reliable holding power for woodworking, metalworking, and fabrication tasks. 2pc/set 8.5 x 22 x 135mm ABS Clamp with M8 x 90mm bolt & knob

Page reports in stock

Observed 6 Sept 2026

McJING Tools

2pc/set T-Track Hold Down Clamp Kit

Enhance your T-track system with this practical hold-down clamp kit. Simply slide the clamps into your standard T19 T-track and tighten to secure workpieces firmly in place. Perfect for adding flexibility and holding power to your workshop setup.

Page reports in stock

Observed 6 Sept 2026

CEAC

3 Flute TiAIN Coated Carbide End Mill

The Premium Carbide End Mills are made from a traceable grade of material. They are precision manufactured for consistency, quality and accuracy. All Micro-Grain Carbide body (carbide grade: K40). Thanks to small grain size (0.5-0.8μm), these end mills are precision ground to a sharper cutting edge. These end mills are centre cutting which means they will plunge, drill or ramp into a cut.TiAIN Coated Solid Carbide End MillsThe Premium TiAlN coated End Mills are coated with the highly regarded Balzers Balinit® Futura Nano TiAlN (titanium aluminium nitride) coating offering high-performance machining and long tool life. Depending upon machine limitations, TiAlN coated end mills can operate at speeds up to 100% higher than uncoated end mills. TiAlN coated end mills are recommended for machining steel, cast iron and stainless steel.In general, TiAlN is a high-performance coating of about same hardness as TiCN but will maintain it's hardness at much higher cutting temperatures.When the cutter is working hard, the aluminium content in the coating forms a gaseous aluminium oxide layer at the cutting edge where the temperature could reach more than 800°C. This helps to protect the HSS-AL substrate from the damaging effects of heat and is what makes this coating ideal for high speed machining, especially when dry cutting. Depending upon the limitations of your machine, TiAlN coated end mills can be operated at speeds up to 100% higher than uncoated end mills.The Balzers Balinit® Futura Nano coating offers outstanding properties enabling high-performance machining and long tool life. In fact Balzers Balinit® Futura Nano not only out-performs uncoated cutters, TiN and TiCN coated cutters but also many other TiAlN coated cutters as well. 3 Flute TiAIN Coated Carbide End Mill Product Code Cutter Diameter Shank Diameter Flute Length Overall Length Helex 060-020-06010 1.0mm 3.0mm 3mm 38mm 30° 060-020-06020 2.0mm 3.0mm 6mm 38mm 30° 060-020-06030 3.0mm 3.0mm 7mm 38mm 30° 060-020-06040 4.0mm 4.0mm 10mm 50mm 30° 060-020-06050 5.0mm 5.0mm 11mm 50mm 30° 060-020-06060 6.0mm 6.0mm 13mm 57mm 30° 060-020-06080 8.0mm 8.0mm 19mm 63mm 30° 060-020-06100 10.0mm 10.0mm 22mm 72mm 30° 060-020-06120 12.0mm 12.0mm 26mm 83mm 30° Feature: K40 Grade Micro Grand Carbide (0.5-0.8μm) Very tight tolerance = h10 Balzers Balinit® Futura Nano TiAIN coating (click to learn more) 3 Flute design is a good balance between high flute volume and good surface finish Suitable for cutting materials up to HRC45 hardness Centre cutting design. Will plunge, drill or ramp into a cut Cuts a square corner

Choose a size or option at the supplier.

Observed 6 Sept 2026

CEAC

3 Flute TiAIN Coated Carbide End Mill-Long Series

The Premium Carbide End Mills are made from a traceable grade of material. They are precision manufactured for consistency, quality and accuracy. All Micro-Grain Carbide body (carbide grade: K40). Thanks to small grain size (0.5-0.8μm), these end mills are precision ground to a sharper cutting edge. These end mills are centre cutting which means they will plunge, drill or ramp into a cut.TiAIN Coated Solid Carbide End MillsThe Premium TiAlN coated End Mills are coated with the highly regarded Balzers Balinit® Futura Nano TiAlN (titanium aluminium nitride) coating offering high-performance machining and long tool life. Depending upon machine limitations, TiAlN coated end mills can operate at speeds up to 100% higher than uncoated end mills. TiAlN coated end mills are recommended for machining steel, cast iron and stainless steel.In general, TiAlN is a high-performance coating of about same hardness as TiCN but will maintain it's hardness at much higher cutting temperatures.When the cutter is working hard, the aluminium content in the coating forms a gaseous aluminium oxide layer at the cutting edge where the temperature could reach more than 800°C. This helps to protect the HSS-AL substrate from the damaging effects of heat and is what makes this coating ideal for high speed machining, especially when dry cutting. Depending upon the limitations of your machine, TiAlN coated end mills can be operated at speeds up to 100% higher than uncoated end mills.The Balzers Balinit® Futura Nano coating offers outstanding properties enabling high-performance machining and long tool life. In fact Balzers Balinit® Futura Nano not only out-performs uncoated cutters, TiN and TiCN coated cutters but also many other TiAlN coated cutters as well. 3 Flute TiAIN Coated Carbide End Mill - Long Series Product Code Cutter Diameter Shank Diameter Flute Length Overall Length Helex 060-020-07030 3.0mm 3.0mm 15mm 57mm 30° 060-020-07040 4.0mm 4.0mm 19mm 57mm 30° 060-020-07050 5.0mm 5.0mm 25mm 63mm 30° 060-020-07060 6.0mm 6.0mm 25mm 75mm 30° 060-020-07080 8.0mm 8.0mm 30mm 75mm 30° 060-020-07100 10.0mm 10.0mm 35mm 75mm 30° 060-020-07120 12.0mm 12.0mm 45mm 100mm 30° Feature: K40 Grade Micro Grand Carbide (0.5-0.8μm) Very tight tolerance = h10 Balzers Balinit® Futura Nano TiAIN coating (click to learn more) 3 Flute design is a good balance between high flute volume and good surface finish Longer flute length Suitable for cutting materials up to HRC45 hardness Centre cutting design. Will plunge, drill or ramp into a cut Cuts a square corner

Option observed: 3 Flute TiAIN Coated Carbide End Mill-Long Series - 3.0mm

Page reports in stock

Observed 6 Sept 2026

McJING Tools

3 Wing Slot Cutter Bit (Slot Cutter Blade + Arbor)

3-flute carbide tipped slot cutter blade + arbor with totally enclosed ball bearing guide. For use in cutting slots (kerfs). Uses include ship lap joints, tongue & groove joints, T-moldings, rabbeting etc.

Option observed: D48mm x W1.6mm x 13mm x 1/4" Shank (Blade JL301 + Arbor JL318)

Page reports in stock

Observed 6 Sept 2026

McJING Tools

3 piece File set

3 Piece file set Length: 120mm

Page reports in stock

Observed 6 Sept 2026

McJING Tools

3 set Corner Radius Jig Router Templates

3-piece corner radius template set 8mm thick acrylic templates that will allow you to make 12 different radius. The 3 templates from 1/8" to 1" (3.2mm to 25.4mm) in 1/16" (1.6mm) increments (R1/8" 3.2mm, R3/16" 4.7mm, R1/4" 6.3mm, R5/16" 8mm) (R3/8" 9.5mm, R11/16" 11.2mm, R1/2" 12.7mm, R9/16" 14.3mm) (R5/8" 16mm, R3/4" 19mm, R7/8" 22mm, R1" 25.4mm) while the clear acrylic plates allows you to see exactly what you are doing. Also, the adjustable and moveable steel index pins align the template exactly on your project and stabilize the template on your work piece for safe cutting of the stock.

Page reports in stock

Observed 6 Sept 2026

ATECH

3" (75mm) Rotary Table with M14 Backplate

This compact rotary table / indexing table is designed for accurate work positioning in metalworking applications. It allows the operator to drill, mill, or cut workpieces at precise angular intervals around a fixed axis, making it ideal for tasks such as bolt circles, gear cutting, slotting, and indexing operations. Its compact and low-profile design makes it perfect for small milling machines, bench lathes, and drill presses fitted with a compound table. The table can be mounted horizontally or vertically, providing excellent flexibility for a wide range of machining setups. The 36:1 worm gear ratio ensures smooth and precise rotation, while the graduated hand wheel allows accurate control when indexing or positioning the workpiece. A back plate and clamping kit are included, allowing quick and secure mounting of workpieces or small chucks. Features 36:1 precision worm gear ratio for accurate indexing 360° table graduations for precise positioning Handwheel with 10-minute graduations for fine adjustment Zero-set handwheel for convenient reference setting Compact design ideal for small mills, lathes, and drill presses Can be mounted horizontally or vertically for versatile use Compatible with 3-jaw chucks, 4-jaw independent chucks, and ER collet adaptors (available separately) Rotary Table Specifications Size: 3" / 75mm Gear Ratio: 36:1 Table Graduation: 0–360° Handwheel Graduation: 10 minutes Height: 42 mm T-Slot Size: 8mm Clamping Kit Size: M6 Through Bore: None Back Plate Specification: Size: 80mm Mounting Thread: M14x1.0mm Clamping Kit 10pcs Set Inclusions: M6 Stud x 2 M6 T-Nut x 2 M6 Flange Nut x 2 Step Clamps x 2 Step Blocks x 2

Page reports in stock

Observed 6 Sept 2026

McJING Tools

3-Flute Solid Carbide V-Groove Bit ( Nano Coating )

Precision 3-flute solid carbide V-Groove router bit engineered for CNC 3D carving applications. The advanced Nano blue coating delivers exceptional hardness and wear resistance, keeping the cutting edge sharp and smooth throughout extended use. Ideal for detailed routing and engraving work. Features a 60°/90° cutting angle with 50mm overall length and 1/4" shank.

Option observed: 60° x 50mm x 1/4" Shank

Page reports in stock

Observed 6 Sept 2026